Ursula's Alcove
Looms: Cardweaving and Inkle Looms
Beka Inkle Loom
Item # YA-BI-2
$70.00
An open-side, right hand, table top model designed for
bands up to 4" wide, 6 - 9 feet long. This is
a good loom for beginners. One belt shuttle is included.
Tension is adjustable by moving square post, which is
shown in picture. Project is not included. A 4"
rigid heddle can also be used with this loom.
Heddle is sold separately.
Egil's Inkle Loom
by Woodstuffs of NC
Item #CJ-003
In Maple or Cherry $90.00
Item #CJ-003P
In Purpleheart $100.00
An open-side, right hand model, designed
for bands up to 4" wide, 170" (roughly 4 1/2 yds)
long. Tension is adjustable by moving the tension bar. This
model can be used for inkle, card weaving or narrow
rigid heddle projects. Project is not included. Shuttle and heddle sold separately.
For warping instructions, click here.
Constanza's Hybrid Loom
by Woodstuffs of NC
Item #CC-H
$120.00
No more loose parts to lose! The old peg system has been replace with a lovely
hand-tooled rachet system. It operates the same as any other loom, you can create
a string apron or tie directly onto the warp beam. Heavy paper is recommended for warping.
Card or tablet weaving, rigid heddle, and inkle bands using the rigid heddle are
the types of weaving that can be down on this versatile strap loom. This loom is
made of maple. Its dimensions are approximately 24.5" long by 9.5" wide and 9.5" high.
Small Box Loom
by Woodstuffs of NC
Item #HL-small
$150.00
Card or tablet weaving, rigid heddle, and inkle bands are
the types of weaving that can be down on this versatile box loom.
Made of hardwood, this lovely loom has a hand-tooled rachet system.
It operates the same as any other loom, you can create
a string apron or tie directly onto the warp beam. Heavy
paper is recommended for warping. The frame dimensions are
approximately 15.5" long by 7 3/4" wide by 7" high. Smaller cards
than those shown are recommended for tablet weaving projects.
Split Level Box Loom
by Woodstuffs of NC
Item #HL-split
$200.00
Card or tablet weaving, rigid heddle, and inkle bands are
the types of weaving that can be down on this versatile box loom.
Made of hardwood, this lovely loom has a hand-tooled rachet system.
It operates the same as any other loom, you can create
a string apron or tie directly onto the warp beam. Heavy
paper is recommended for warping. It has a higher back
frame so that your weaving is on an angle and less bending
is required. The frame dimensions are approximately 28.5" long
by 13" wide by 13" high in the back and 8" high in the front.
Mini-Inkle Loom
by Woodstuffs of NC
Item #CJ-002
$25.00
It's cute and yet it's not a baby duck! This inkle is extremely portable and does small bands.
The total length of the band does not exceed 45"" long. The tension is adjusted by the foot along
the back edge. It pivots. Move it as needed. Base wood is available in Maple, Purpleheart or Oak.
Shuttle and project are not included. Made in North Carolina.
Books:
